[ToolKit] Acer Iconia v0.8.1 ***New: Supporting A3-A10 / New: Pull system.img.gz***

[ToolKit] Acer Iconia v0.8.1 ***New: Supporting A3-A10 / New: Pull system.img.gz***

The Acer Iconia Toolkit is supporting following devices at the moment:
  • B1-A71
  • B1-710
  • B1-A710
  • B1-711
  • A1-810
  • A1-811
  • A3-A10

At the moment the following features are available:
  • Root from scratch (Unix only / recommended)
  • Root with prerooted Image (see Download links at the bottom)
  • Unroot
  • Swap External <-> Internal SD
  • Odex ROM
  • Pull system.img.gz off your device



Download Acer Iconia Toolkit v0.8.1
 

Older Versions:




Features coming soon:
 
  • Deodex
  • Fix permissions
  • Fancy GUI App
Acer Iconia B1-A71 Downloads:
 

Apply the "Invalid Partition Error" fix before rooting!!!
To avoid unfixable bootloop, first apply this patch from Acer.
Install the APK, start it, click on FixG1PMT (no feedback) and uninstall afterwards. Good luck!


If you're rooting with prerooted system.img.gz here are the Downloads. Pick the one, fitting to the firmware installed on your tablet, otherwise you will get into bootloop!

RV03RC05:
Acer Firmware Update [mirror] [mirror + md5]
RV04RC04:
system.img.gz
RV05RC05:
Acer Firmware Update [mirror1] [mirror2] [mirror3] [mirror4 + md5] [mirror5 + md5] system.img.gz [mirror1] [mirror2] [mirror3] [mirror4 + md5] [mirror5 + md5]


Acer Iconia B1-710 / B1-A710 Downloads:


Acer Iconia B1-711 Downloads:
 

RV01RC04_WW_GEN1:
system.img.gz


Acer Iconia A1-810 Downloads:
 

RV03RC08:
system.img.gz
RV18RC07_WW_GEN1:
update.zip (about 4MB)system.img.gz with /system RW workaround (MD5 = 214db984aee42ef0c05d1cfa43d193c1) (needs extra config and SuperSU instead of Superuser) [torrent] (see this post also)
RV21RC02_WW_GEN1:
update.zipsystem.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV21RC03_TWN:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV27RC03_WW_GEN1:
stock system.img.gzupdate.zip
RV18RC10_PA_CA:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
RV26RC06_PA_CUS1:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)[mirror][mirror] (preferred)
Stock Images: (Workaround to unroot: Put the system.img.gz of your version into system_image and choose root option in toolkit)
RV03RC08:
system.img.gz
RV18RC07:
system.img.gz ( MD5=550ECDB192F5668264B11B1070F4B932 )

How to root from scratch


Acer Iconia A1-811 Downloads:
 

RV01RC11_WW_GEN1:
Acer Firmware Update
RV02RC22_TWN_GEN1:
system.img.gz with /system RW workaround (needs extra config and SuperSU instead of Superuser) (see this post also)
Unbrick:
Stock Firmware RV01RC11 (copy on SD and flash from recovery)


Acer Iconia A3-A10 Downloads:
 
Coming very soon...
Common
 

B1-A71 / B1-710 / B1-A710: Install this after rooting: Superuser App on Google Play StoreA1-810 / A1-811 / B1-711: Install this after rooting: Superuser App on Google Play Storehttps://play.google.com/store/apps/d...infire.supersu
Verify your root: Root Checker on Play Store


FAQ
 

Q: I'm stuck inside a bootloop after rooting!!!11
A1: The system.img.gz you applied, wasn't suiting to the firmware version installed on your tablet. Download latest Acer firmware update ( !!! if available !!!), copy it on a micro sd card, plug it into your Iconia, go to recovery by holding Volume up and Power button while device is turned off. Then choose apply update from sd card.
A2: If you cannot apply any Acer firmware, because you always get a partition error while installing, you should do a reboot after you get the error. A user reported that this made her/his device boot into Android again, showing the new version in settings -> info. Good luck
A3: If the A1 and A2 didn't help. Send back the device to Acer. Tell them you tried to apply an update from sd card and ended up in this bootloop. Sending device back to Acer over UPS is free. Good luck!
Q: Successfully rooted, but still no root after rebooting!
A: Have you installed Superuser App from Google Play Store?
(B1-A71 only)Q: Cannot update, always getting ERROR: - Invalid partition setting; 17: fat 238e8000:888e8000; Instalation aborted.
A: Download "Invalid Partition Error" Patch.
(B1-A71 only)Q: I applied update from RV05RC05 to RV05RC06 but still it shows RV05RC05.
A: There is no RV05RC06. It is the RV05RC05. It got on Acers Download section with a RV05RC06 named zip file. But the content is 100% equal to RV05RC05.
Q: Toolkit fails or crashes for any reason and I don't know what to do.
A: Run it again with parameter -d, e.g.: toolkit.exe -d and post the entire output here.
Q: Root from scratch on Linux 64bit doesn't work because of Error message: 'No such file or directory bin/posix/64/adb'
A: sudo apt-get install ia32-libs
Q: Can i flash a custom recovery?
A: No, because bootloader is locked. You would brick your tablet.
Q: Are there Custom ROMs?
A: No, see answer above.
Q: Is my data wiped during root?
A: No.
Q: Do i lose root after factory reset or wipe date?
A: No.
Q: I get an error in Engineer mode entering telnet command.
A: If Swiftkey is installed / enabled try settings Google AOSP Keyboard as default.
Q: How can I start telnet server manually?
A: Try this.



What you can do with root:
 

Apply Supercharger V6 by zeppelinrox and significally speed up your tablet! [My small How-To]
Install Adaway, an ad-blocker for webbrowsers and apps containing ads.
Install ROM Toolbox and customize boot screen and other funny things.
Install Titanium Backup to Backup, Freeze, Uninstall any App and more.
Install Datasync to sync app data like save states between rooted devices.


What you can NOT do with root on these devices:
 

Change DPI
Flash Custom Recoveries
Flash Custom ROMs